Remember our friend Stephanie, who spent the summer of 2012 on a reality show?
Though she’s a chemist, she quickly became known for her craftiness, always making stuff, designing furniture, etc. As she puts it, she imagines that she may be an interior designer in an alternate universe. Very much in touch with her crafty side, this one…. so, we asked her to write a guest blog post, showing you how to make her fabulous DIY hanging light fixtures!
|So I live in a pretty cool loft space, but my apartment was riddled with really ugly generic metal light covers that looked more like they belonged in a public school than my apartment. I LOVED some of the fixtures available at Design Within Reach, but they were ridiculously expensive, and I wasn’t willing to drop $2K on four lamp shades. So what’s a gal to do? Make your own! Here’s my step by step process on how to do just that.
Step 1: Acquire big punching ball balloons and inflate until they are nice spheres- the size of these will determine the size of your finished lamp shades, so fill appropriately. A good place to find these is at a party supply store. Also purchase the other supplies you’ll need: wall paper paste, Vaseline, yarn, and stiffening spray. The yarn is going to be the structure of the lamps at the end of your project, so here is where you can really personalize things. Choose colors that go with your décor, or maybe a variety of yarn thicknesses or textures.
Step 2: You’ll want to set up a work space (like that one shown above) where you can suspend the balloons and protect your flooring from drips. An alternative is to work outside or in a basement- but if working outside just make sure it isn’t somewhere that things may blow through the air and stick to your crate.
Now the fun begins! Cover each balloon with Vaseline. Yes, this gets quite messy.
Step 3: Now you’ll be covering your yarn with wallpaper paste. A small bucket is quite helpful here.
Step 4: Pull the yarn out of the paste and wrap around your balloon. Squeeze off excess paste between your fingers as you remove it from the bucket. Otherwise it will be too sloppy & wet. This can be done as a one person job, but it is much easier with two people working together here!
Step 5: Continue adding on string. I used a couple different tones/ thicknesses for variety. Keep swirling yarn around the balloons until you have a nice framework created. Don’t forget to leave an opening at the bottom large enough to slide over your light bulbs!
Step 6: Once dry (I waited 24 hours), spray with stiffener spray- do not hold back! Be liberal with this stuff. J Let dry completely after spraying. Next, pop the balloons and your project is almost complete! I suggest another round of stiffener spray at this point.
Step 7: Hang and enjoy! Looks pretty similar to those retailing for about $1000 here. For less than $10 a pop in supplies to make them yourselves, I think it is worth a little effort!