Figure Skating: How to Make Soakers / “Flingies” (Blade Covers)

With summer skating season coming up soon – or having already begun! – I figure it’s a good time for a quick, easy, and fun tutorial: Learn how to make your own blade covers!

These have different nicknames, depending on where you live. At my old rink, we referred to them as “flingies”, because we would amuse ourselves by flinging them at each other during the floods. Nowadays, they seem to mostly be called “soakers”

There are two main ways to make these, Basic – all terrycloth – is the most common style for purchase. For this blog, I’ll be showing you how to make the other style, which my favourite kind. These ones use two fabrics – a decorative one for the outside, and terrycloth for the inside.


My beloved custom Rose boots havem uh.. seen better days!

First, you’ll need to figure out what size you’ll want for your pattern pieces. The size of the pieces of fabric you will use depend on the size of the blade. If you have an old pair of flingies hanging around, you might want to take them apart as a pattern. Feel free to play with the sizing, but as examples:

– The one size fits all ones from the store are about 15.5″ x 5.5″

– I like to do mine a bit bigger, about 16.25″ x 6.25″

Once you have decided on a size for your pattern, cut two pieces of either terrycloth or chamois, and two pieces of whatever fabric you want on the outside. Pretty much any kind of fabric can be used on the outside of the flingie, I used to go to local fabric stores’ remnants bin and buy different funky patterns. The sizing will be the same as the pieces for the basic soakers.

Place the right sides of your outer fabric facing the side of the inner fabric that will be against the blade of the skate. Sew a straight seam up each of the long sides of the rectangles.

Cut 4 pieces of elastic that are shorter than the long sides of the rectangles: you’ll want a length of elastic that will suit your size, and keep the soaker on the skate. As an example, a pair of store bought “one size” soakers uses 2 lengths of 8.5″ elastic per soaker.

On the terrycloth / chamois side of the rectangles, apply a length of elastic to one of the straight seams, stretching the elastic to fit. This is best done using a zig zag stitch. Repeat this to the other 3 seams.

Flip both of the flingies right side out. Fold them in half so that the long sides match up.

Line up the seams of the long edges on the sides, and sew the side seams with a straight stitch.

Finish off side seams with a zig zag or Serger finish, before turning soakers right side out.

Interested in learning more about sewing for figure skaters? Check out my book “Spandex Simplified: Sewing for Skaters“! In it, you’ll learn everything you need to know about designing and creating spectacular and durable figure skating dresses.

This book is appropriate for beginner to advanced levels of sewing ability, and is written from both a designer, and former figure skater’s point of view. It will teach everything from the basics, to tricks of the trade. “Spandex Simplified : Sewing for Skaters” will prepare the reader to design and make almost any design of practice or competition dress imaginable.

Given the cost of decent competition suits – or even practice dresses! – this manual will more than pay for itself with the savings from just one project!

The entire book is written completely in laymans’ terms and carefully explained, step by step. Only basic sewing knowledge and talent is required. Learn everything from measuring, to easily creating ornate applique designs, to embellishing the finished suit in one book! For a complete table of contents, more information, or to order, click here.

2 thoughts on “Figure Skating: How to Make Soakers / “Flingies” (Blade Covers)

  1. You say to cut 4 pieces of elastic, but I can only see two being used. For the step where you say to sew a piece of elastic to the Terry cloth side then repeat on the other three seems, what are the other three seems? This had to be one of the things I did wrong because mine definitely did not work.

    Thanks for your help!

    1. Hi Veronica,

      You’re making a pair of them, each uses one piece of fabric, one piece of terrycloth, and two pieces of elastic.

      The elastic gets sewn to the long sides of each.

      Hope this helps.

Leave a Reply

Your email address will not be published. Required fields are marked *